Basit öğe kaydını göster

dc.contributor.authorCoşkun, B. and Mensah-Darkwa, K. and Soylu, M. and Al-Sehemi, A.G. and Dere, A. and Al-Ghamdi, A. and Gupta, R.K. and Yakuphanoglu, F.
dc.date.accessioned2021-04-08T12:07:32Z
dc.date.available2021-04-08T12:07:32Z
dc.date.issued2018
dc.identifier10.1016/j.tsf.2018.03.033
dc.identifier.issn00406090
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85044147513&doi=10.1016%2fj.tsf.2018.03.033&partnerID=40&md5=79ff0cec94ba08fb27928de4c99adbee
dc.identifier.urihttp://acikerisim.bingol.edu.tr/handle/20.500.12898/4353
dc.description.abstractIn this work, 3% Fe doped zinc oxide (ZnO) doped by Nitrogen thin films were grown by reactive radio frequency magnetron sputtering on p-Si substrates. The structural and optical properties of the 3% Fe doped ZnO doped by Nitrogen thin films were investigated by the scanning electron microscope and spectrophotometry. The diodes with the configuration of Al/p-Si/3% Fe-ZnO:N/Al have been fabricated and it has been observed that the diodes exhibit a good rectification. The optical band gap was found to be 3.98 ± 0.02 eV for 3% Fe doped ZnO:N thin film deposited at the N2 flow rate of 15 sccm. The electrical parameters of the diode were determined using Cheung's and Norde's method. The capacitance–voltage and conductance–voltage characteristics of Al/p-Si/3% Fe-ZnO:N/Al structure have been investigated in the frequency range 10 kHz–1 MHz. The increase in capacitance at lower frequency is attributed to the density of interface states. It is evaluated that the prepared diodes can be used as nanoscale electronic and optoelectronic devices. © 2018 Elsevier B.V.
dc.language.isoEnglish
dc.sourceThin Solid Films
dc.titleOptoelectrical properties of Al/p-Si/Fe:N doped ZnO/Al diodes


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster