Show simple item record

dc.contributor.authorSoylu, M. and Al-Ghamdi, A.A. and Omran, S.B. and Yakuphanoglu, F.
dc.date.accessioned2021-04-08T12:09:23Z
dc.date.available2021-04-08T12:09:23Z
dc.date.issued2014
dc.identifier10.1016/j.jallcom.2014.08.048
dc.identifier.issn09258388
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84906871609&doi=10.1016%2fj.jallcom.2014.08.048&partnerID=40&md5=8d1ca56e5ebfa11f2ca8a92aae0e4362
dc.identifier.urihttp://acikerisim.bingol.edu.tr/handle/20.500.12898/4824
dc.description.abstractCuBO2/p-Si diode is a new rectifying structure with photosensing, which is a candidate for producing high voltage protection circuit in electronic application. It has been seen that the photocurrent in the reverse bias I-V characteristic is strongly increased by photo-illumination. It is believed that the combination of thin CuBO2 layer and p-Si will provide high voltage protection level, which does not exist for conventional Si diodes. The capacitance and conductance-voltage characteristics were measured at various frequencies. The results indicate that the electrical parameters of CuBO2/p-Si diode are affected by the series resistance and interface states. The optical properties of the CuBO2 thin film were analyzed by UV-vis-NIR spectrophotometry and FTIR studies. The optical band gap of the CuBO2 is located in the ultraviolet (UV) range. In this spectral range, the BOB bonds and relationship between Cu2+-O are confirmed. © 2014 Elsevier B.V. All rights reserved.
dc.language.isoEnglish
dc.sourceJournal of Alloys and Compounds
dc.titleRectifying structure with high voltage operation based on CuBO2 as an UV photocatalyst


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record