Başlık için 6.Araştırma Çıktıları / Research Outcomes(WOS-Scopus-TR-Dizin-PubMed) listeleme
Toplam kayıt 2563, listelenen: 992-1011
-
Fabric defect detection methods for circular knitting machines [Yuvarlak Örgü Makineleri için Kumaş Hatasi Tespit Metotlari]
(2015)In this paper, an online fabric defect detection system that can detect fabric defects which may occur during the fabric product in knitting machines is introduced. This system mainly includes three steps: 1) Construction ... -
Fabric defect detection systems and methods—A systematic literature review
(2016)This paper presents a comprehensive literature review of fabric defect detection methods First, it briefly explains basic image acquisition system components such as camera and lens. Defect detection methods are categorized ... -
Fabrication and characterization of alkaline leached CuZn/Cu electrode as anode material for direct methanol fuel cell
(2015)Alkaline-leached CuZn binary coatings were electrochemically prepared on a copper substrate and characterized for methanol electro-oxidation in alkaline solution. The electrodes were characterized by SEM (scanning electron ... -
Fabrication and characterization of light-sensing device based on transparent ZnO thin film prepared by sol-gel
(2016)In this work, sol-gel method is used for obtaining the ZnO films. The device is constructed from aluminum and n-type ZnO thin film deposited on top of an n type-silicon substrate. Although the structure is formed from the ... -
Fabrication and characterization of NiCoZn-M (M: Ag, Pd and Pt) electrocatalysts as cathode materials for electrochemical hydrogen production
(2011)Ag, Pd and Pt-modified alkaline leached NiCoZn composite coatings were prepared on a copper specimen by electrochemical technique. The chemical composition of layers before and after leaching as well as after noble metal ... -
Fabrication and characterization of three-dimensional silver nanodomes: Application for alkaline water electrolysis
(2017)A novel approach to fabricate three-dimensional (3D) silver nanodomes (AgNDs) based on combination of soft lithography and nanosphere lithography was reported. Scanning electron microscopy (SEM) and atomic force microscopy ... -
Fabrication and characterization of transparent MEH-PPV/n-GaN (0 0 0 1) heterojunction devices
(2012)n-GaN/MEH-PPV thin film heterojunction diode was fabricated by depositing MEH-PPV thin film using spin-coating process on n-GaN (0 0 0 1). The junction properties were evaluated by measuring I-V characteristics. I-V ... -
Fabrication and electrical characteristics of Perylene-3,4,9,10- tetracarboxylic dianhydride/p-GaAs diode structure
(2012)This study aims to experimentally investigate whether Perylene-3,4,9,10- tetracarboxylic dianhydride (PTCDA) organic layer at p-GaAs/Ag interface affects electrical transport across this interface or not. The electronic ... -
Fabrication and electrical characterization of solution-processed all-oxide transparent NiO/TiO2 p-n junction diode by sol-gel spin coating method
(2013)Solution-processed all-oxide transparent NiO/TiO2 p-n junction was fabricated using sol-gel spin coating method. The optical properties of the NiO and TiO2 films were studied by transmittance and absorbance spectra. The ... -
Fabrication of Mo-modified carbon felt as candidate substrate for electrolysis: Optimization of pH, current and metal amount
(2018)Mo was electrochemically deposited over a carbon felt (C) support in order to enhance hydrogen evolution activity of the support and make it a candidate for further modifications. For this aim, the effects of pH of deposition ... -
Fabrication of rhodanine self-assembled monolayer thin films on copper: Solvent optimization and corrosion inhibition studies
(2018)Rhodanine self-assembled monolayer (Rh-SAM) films were prepared on copper specimens in different solvents. The assembled films were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy ... -
Fabrication of three-dimensional copper nanodomes as anode materials for direct methanol fuel cells
(2019)In this study, we demonstrate a novel approach for fabricating copper nanodomes (Cu-NDs) by combining of soft lithography, nanosphere lithography, physical vapor deposition (PVD) and electrochemical deposition methods. The ... -
Fabrication of tunable plasmonic 3D nanostructures for SERS applications
(2016)Surface-enhanced Raman scattering (SERS) is a powerful technique used for characterization of biological and nonbiological molecules and structures. Since plasmonic properties of the nanomaterials is one of the most important ... -
Fabrication, characterization and application of three-dimensional copper nanodomes as efficient cathodes for hydrogen production
(2019)In this study, three-dimensional (3D) copper nanodomes (Cu-NDs) were fabricated by a combined method of nanosphere-soft lithography, electrochemical and physical vapor deposition (PVD) methods. The 3D Cu-NDs were characterized ... -
Factors affecting industrial coal demand in Turkey
(2019)The aim of this paper is to investigate the factors affecting industrial coal demand by using an econometric model. Industrial coal demand, both short term and long term, was examined with Autoregressive Distributed Lag ... -
Factors Predicting Falls in Parkinson's Disease: Investigation of Motor, Non-motor Findings and Different Dual Task Activities
(2020)Objective: The purpose of this study was to identify the predictors of future falls in mild-to-moderate stage Parkinson's disease (PD) without cognitive impairment. We evaluated motor findings, non-motor findings, and ... -
Factors predicting falls in parkinson’s disease: Investigation of motor, non-motor findings and different dual task activities [Parkinson hastalığında düşmeyi öngördüren faktörler: Motor ve non-motor bulgular ile farklı çift görev aktivitelerinin birlikte incelenmesi]
(2020)Objective: The purpose of this study was to identify the predictors of future falls in mild-to-moderate stage Parkinson’s disease (PD) without cognitive impairment. We evaluated motor findings, non-motor findings, and ... -
Failure load prediction of adhesively bonded GFRP composite joints using artificial neural networks
(2020)There are different process parameters of bonding joints in the literature. The main objective of the paper was to investigate the effects of bonding angle, composite lay-up sequences and adherend thickness on failure load ...
DSpace@BİNGÖL by Bingöl University Institutional Repository is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 Unported License..
