Show simple item record

dc.contributor.authorErçetin, Ali
dc.contributor.authorUsca, Üsame Ali
dc.date.accessioned2017-01-11T08:37:21Z
dc.date.available2017-01-11T08:37:21Z
dc.date.issued2016
dc.identifier.citationErçetin, A. and Usca, Ü.A. (2016). An Experimental Investigation of Effect of Turning AISI 1040 Steel at Low Cutting Speed on Tool Wear and Surface Roughnes, Tr. J. Nature Sci, 5(1), 29-36.tr_TR
dc.identifier.urihttp://www.bingol.edu.tr/documents/2016%20Say%C4%B1%201.pdf
dc.identifier.urihttp://hdl.handle.net/11472/1078
dc.description.abstractIn this study, the effect of different cutting speeds on cutting tool wear and surface roughness was investigated in turning operation. Cylindrical bars of AISI 1040 steel was selected as workpiece materials during this investigations in turning process. The K type coated CVD(Chemical Vapor Deposition) TiAlN ceramic tungsten carbide cutting tools were used in turning of bars. Surface roughness of turned bars and tool wear were accepted as criteria for performance evaluation of these cutters. Tool wear was determined by performing SEM (scanning electron microscopy) and EDX (Energy Dispersive X-ray spectroscopy) analyses after conducting other experimental studies at a constant feed rate. Surface roughness values were also measured after every turning process. The aim of this study was to investigate the influence of cutting speed, especially low cutting speed on tool wear and surface roughness. According to experimental results, decreasing of cutting speed forces the cutting tool more and increasing of cutting speed not only causes more coating wear, but also increase radius of cutting nose. However, the best surface roughness could be obtained in turning process for max cutting speed.tr_TR
dc.language.isoengtr_TR
dc.publisherTurkish Journal of Nature and Sciencetr_TR
dc.subjectTurning; tool wear; surface roughness; SEM; AISI 1040.tr_TR
dc.titleAn experimental investigation of effect of turning AISI 1040 steel at low cutting speed on tool wear and surface roughnesstr_TR
dc.typeArticletr_TR


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record